&OHDQWKHDUHDDURXQGWKHFXWRUSXQFWXUHXVLQJDFHWRQHRU0(.
2.
Draw the outline of the patch using chalk or pencil (do not use ink).
&XWWKHSDWFKFRYHUWKHFXWRUSXQFWXUHZLWKDSSUR[LPDWHO\FP
inch) overlap on all sides.
3. Apply tape along the outline of the patch. This will prevent the glue
from spreading outside the patch area.
$SSO\JOXHRQERWKWKHERDUGDQGSDWFKXVLQJDEUXVKRURWKHU
DSSOLFDWRU0DNHVXUHWKHJOXHLVVSUHDGHYHQO\DQGFRPSOHWHO\RYHUWKH
ERDUGDQGSDWFK/HWWKHJOXHGU\IRUPLQXWHV
$SSO\WKHSDWFKVWDUWLQJRQRQHVLGHDQGPRYHWRZDUGVWKHRWKHUVLGH
Be careful not to trap any air bubbles.
8VHDKDLUGU\HUWRJHQWO\KHDWWKHDUHDWRHQVXUHDJRRGERQGEHWZHHQ
the patch and the board.
Use a metal spatula or spoon and firm pressure to ensure a good bond
and to remove any air bubbles.
K
Allow the glue to cure with
the board un-inflated for 24
hours prior to use.
4
5
6