Aqua Lung EPG, Owner'S Manual, Page: 9 / 16

7
Set Units
1. Press the left button four times to advance the cursor over
the Units Icon.
2. Press the right button to select.
3. The PSI or BAR symbol starts to flash (figure 13). Press the
left or right button to change. Press both buttons to accept.
4. The °F or °C starts to flash (figure 14). Press the left or right
button to toggle between °F and °C. Press both buttons to
accept and return to Standby Mode. If there is no button
activity for 30 seconds, the gauge will automatically return to
Standby Mode.
Figure 13
Set Pressure Units
Figure 14
Set Temperature Units