Aqua Lung EPG, Owner'S Manual, Page: 6 / 16

4
Menu System
The EPG
®
has four menu options (figure 5): Check Battery, Set
Alarms, Set Time, and Set Units. The menu system can only be
accessed while in Standby Mode. You navigate through the menu
system by pressing the left button. The screen for each mode shall
appear, along with the menu cursor denoting which mode it is.
When you reach the mode you want, press the right button to
select (except Check Battery). While in any of the set modes,
pressing the right button increases a value and pressing the left
button decreases a value. Pressing and holding either button
accelerates the change. Pressing both buttons accepts the new
setting and advances to the next setting and exits the mode after
the last setting.
Check Battery
1. Press the left button once to advance the cursor over the
Battery Icon.
2. For this mode, you do not need to press the right button to
select. Pressing the right button will return you to Standby
Mode.
3. The unit displays the battery voltage (figure 6). If the battery
displays a voltage lower than 2.75v, it is highly recommended
that you change the battery immediately. (See page 10 for
battery warning).
4. If there is no button activity for 30 seconds, the gauge will
automatically return to Standby Mode.
Figure 5
EPG
®
Menu System
Figure 6
Check Battery