16
STEAM MOP OPERATION
8. Align and attach Velcro on the microfiber steam mop pad to the Velcro on the microfiber
steam mop pad holder.
9. To attach the microfiber steam mop pad holder place foot on release pedal and gently
push down, lower the power head onto the microfiber steam mop pad holder and
LIGHTLY press down to snap into place.
NOTE
: Never operate the steam mop without the microfiber steam mop pad in place.
10. Grasp the water tank release lever and pull forward to remove the water tank.
11. Remove cap from the water tank bottom and fill water. Replace the cap and reinstall the
water tank.
NOTE
: Do not attempt to use team mop without water in tank.
REPLACING THE HARD WATER FILTER
The hard water filter will help filter minerals that reduce the effectiveness
of the steam cleaner. Depending on hard water conditions and/or use
frequency, the filter should be replaced every 6 months.
WARNING: Unplug cord from electrical outlet before servicing.
