background image

PUMPS FOR THE LEISURE WATER INDUSTRY

Box 2526 / Chino, CA  91710

Shipping:  5651 Schaefer Ave. / Chino, CA  91710

FAX:  909/627-5660  

  TEL:  909/591-7453

www.aqua-flo.com

with ceramic ring. 

Caution: Do not grip impeller sleeve.

3. Reinstall the wear ring over the impeller hub in correct orientation.

Reinstalling the Suction Cover

1. Inspect the o-ring for damage. Replace if necessary.

2. Properly install the o-ring on the cover before mounting the cover to the volute.
3. Cover can be mounted to the volute in one orientation only. An ‘aligning’ feature is built-in with each part, to ensure

proper mounting. When properly aligned, the cover should slide in easily.

4. Secure the cover to the volute with screws. Tighten all screws alternately (crisscrossing the cover) to achieve

proper o-ring compression and cover seating.

5. Rotate the impeller by hand to make sure that it is rotating freely, without any interference.

Reconnecting the Pump Unit

1. Clean the seals, gaskets, or o-rings of the plumbing connectors. Replace if cracked, worn, or damaged.
2. Reconnect the plumbing lines to the pump. Hand tighten only.

3. Be sure that the pump unit is secured properly to the platform or base, if applicable. Tighten the bolts if necessary.
4. Reconnect the power supply. Be sure that all wires are properly and securely connected.

C

AUTION

: B

EFORE

 

TURNING

 

THE

 

POWER

 

ON

BE

 

SURE

 

THAT

: 1) T

HERE

 

IS

 

AN

 

ADEQUATE

 

AMOUNT

 

OF

 

WATER

 

IN

 

THE

SYSTEM

;  2) A

LL

 

VALVES

 

ARE

 

OPEN

 

TO

 

ALLOW

 

WATER

 

CIRCULATION

; 3) A

LL

 

CONNECTORS

 

AND

 

FITTINGS

 

ARE

 

PROPERLY

ALIGNED

 

AND

 

SECURE

.

FLO-MASTER

®

 "TMCP" SERIES PUMPS LIMITED WARRANTY

Aqua-Flo, Inc.

Third year          60%

Fourth year       40%

Fifth year           20%

EXCLUSIONS

1.  This warranty shall not apply to any failures

resulting from negligence, abuse, misuse, misapplication,

improper installation, alteration or modification, chemical

corrosion, or improper maintenance.

2.   Any items manufactured by other companies

and used by AQUA-FLO  in its products may carry

warranties by the original manufacturers.

3. AQUA-FLO is not liable for incidental or

consequential damages, loss of time, inconvenience,

incidental expenses, labor or material charges in

connection with removal or replacement of the

equipment.

AQUA-FLO is not responsible for any implied

warranties or representations by others and the foregoing

warranty is exclusive and in lieu of all warranties provided

herein.

Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights and

you may also have other rights, which vary from state to

state.

WARRANTS TO:

____________________________________________

________________________________________________________________________________________________

the original retail purchaser only, that the

products they manufacture are free from defects in

material and/or workmanship for a period of five years

(pump seals warranty for 30 days) from date of purchase.

If within the first two years, any such products shall prove

defective, it shall be repaired or replaced at AQUA-FLO’S

option as follows:

The original retail purchaser shall first contact the

installing dealer, as soon as possible after discovery of

the defect, but in no event later that the expiration date of

this warranty.  Or upon notification,

AQUA-FLO, INC.

Customer Service Department

P.O. Box 2526, Chino, CA  91708

will advise the consumer of the address to which

the defective item may be shipped, together with  the

model number, serial number and date of purchase of

item claimed to be defective.  The consumer must pay for

all shipping charges.

If within the years three through five any such

products shall prove defective, the original retail

purchaser shall be entitled to purchase replacement

equipment or components at the following percentage off

the current published list price:

Summary of Contents for Tub-Master Series






Reviews: