C-25 EVO OWNER’S MANUAL
Aqua Exclusive
10
Rinse Pump
1. Rinse Pump Filter outlet 4” (110mm)
2. Hose/PVC pipe to Rinse Pump Inlet
3. PVC Reducer ring
4. Spray Bar
5. Hose/PVC pipe from Rinse Pump Outlet to Spray Bar
6. Build-in UV-System
7. Drum Motor
8. Filter Outlet 4” (110mm)
9. Flexible Rubber Tee Coupling 4” (110mm)
Figure 7:
C-30 PRO with rinse pump
ΖQVWDOOLQJ5LQVH3XPS
• It is important, however, that a high-pressure hose/PVC pipe is used for this purpose.
• The pump generates a pressure of 3 bar. Pressure peaks of 4 bar may occur during start-
up. Therefore do not use sewer & drain PVC.
• The high-pressure pump itself must be placed in a moisture-free location below the water
level.
• TIP: Place a ball valve between the output and the high pressure pump.
1.
3ODFHDȵH[LEOHFRXSOLQJWHHDWWKHRXWSXWRIWKHȴOWHU2QHRXWSXWRIWKHWHHLVIRUWKH
ULQVLQJSXPSDQGWKHRWKHUVHUYHVDVDSDVVDJHWRWKHELRORJLFDOȴOWHURUSRQGSXPS
2. Connect the output of the tee to the high-pressure pump (2) and the high pressure pump
to the spray tube (5).
1
2
3
4
5
6
7
8
9