![background image](http://html1.mh-extra.com/html/aqua-creek/water-rider-3/water-rider-3_owners-manual_2958208008.webp)
Copyright © 2015 Aqua Creek Products All Rights Reserved
Revised 5/1/2015
Pool Bike Maintenance
1. Remove the bike once a week and rinse it thoroughly with soft water, not
pool water.
2. Regularly check the pH of your swimming pool.
3. Remove the bike during manual dosages of chemical products or chlorine
stock treatments. Keep the bike away from chemicals to avoid any splashing
which can stain or cause deposits.
4. Deposits of powder, salt, and other corrosive products will speed up the
corrsion process.
5. When cleaning the surfaces of the swimming pool it is advised to remove
the bike from the pool in order to avoid any risk of stains or deposits.
6. When you are not using the bike, it must be rinsed thoroughly with soft
water, then dried and stored in a location away from chemical products.
7. If there are lime-scale deposits or stains, they can be removed with a
polishing cleaner for stainless steel and a non-abrasive soft cloth. Then wash
the bike with clean water and dry it completely.
The WR3 is made of marine quality AISI 316L stainless steel. Its anti-corrosion
treatment makes it suitable for chlorinated water, seawater and thermal waters.
It does not require any special care in pH-controlled water (6.7 / 7.6).
8