background image

Copyright © 2020 Aqua Creek Products All Rights Reserved

Revised 3/18/20

24V Solar Charger

Instructions

9889 Garrymore Ln

Missoula, MT 59808

888-687-3552 | +1-406-549-0769

www.aquacreek.com

PART #: F-044SCH-04

(For use with Admiral, Ranger 2 & Ambassador)

MANDATORY 

 

LEAVE THIS MANUAL WITH LIFT OWNER

Read and follow all instructions.

Lift safety can only be ensured if the lift is installed and 

operated according to these instructions.

• 

NEVER permit children to play on or around the lift

• 

Do not allow children to use the lift without adult 

supervision

• 

NEVER apply direct water pressure to the electronics

• 

NEVER use the lift with a dry pool

Check entire box and all packing materials for parts. Before beginning assembly, read the 

instructions and identify parts using the fi gures and parts listed in this document.

It is critical that all parts be carefully inspected prior to installation. If any damage occurred in 

transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit. 

Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s 

warranty and may aff ect the safety of the user.

READ CAREFULLY

1

Summary of Contents for F-044SCH-04










Reviews: