Copyright © 2016 Aqua Creek Products All Rights Reserved
Revised 12/12/16
Battery Maintenance
1)
RECHARGE THE BATTERY AS OFTEN AS POSSIBLE.
The battery power unit is
a sealed lead acid battery pack. Frequent recharges will prolong the battery life
and maintain a high cold amperage capacity.
2)
Do NOT expose the battery to freezing temperatures.
3)
Do NOT expose the battery to prolonged periods of extreme heat or severe cold
temperatures.
4)
Do NOT expose the battery to long periods of direct sunlight. Heat will shorten
your battery life. Optimum operating temperature is below 20 degrees Celsius
(68 degrees F.)
5)
Never drop or bump the battery pack. This may result in loose or damaged internal
connections, and may bend the battery terminals.
6)
Keep battery terminals clean and free from dirt and corrosion to ensure good
contact. The terminals may be cleaned using Scotch Brite or any similar product.
Clean off any corrosion or discoloration on the very top surfaces of the battery
contacts and then apply dielectric grease (supplied with lift) as shown in the
figure below.
TAB TO
FRONT
HANDSET
CABLE
MOTOR
POWER
CABLE
1
2
MAKE SURE
PLUGS ARE
FULLY SEATED
AS SHOWN
BELOW
CLEAN WITH
SCOTCH-BRITE PAD
AND APPLY
DIELECTRIC
GREASE TO
TERMINALS
3
