background image

Copyright © 2016 Aqua Creek Products All Rights Reserved

Revised 12/14/2016

Revised: 8/26/2016

AQUA CREEK PRODUCTS, LLC LIMITED ONE (1) YEAR WARRANTY:

AQUA WALKER

(ITEM #: F-605UW)

Aqua Creek Products, LLC (a.k.a. Aqua Creek) warrants to the original end user purchaser that products manufactured by Aqua 

Creek, when properly installed in accordance with assembly and installation instructions and properly used and maintained, shall 

be free from defects in material and workmanship for a period of one (1) year from the date of original purchase, provided that 

Aqua Creek receives prompt notice in writing of any defect or failure and satisfactory proof thereof, with the following exceptions:

Exceptions:  

• 

This warranty specifically excludes reimbursement for labor to remove, repair, or install the product and any freight charges.

• 

This warranty does not cover any damages due to accident, misuse, abuse, negligence or failure to properly maintain any 

products, or normal wear and tear from day to day operations. 

• 

In the event that any products are altered, repaired, or improperly installed by anyone without the prior written approval by 

Aqua Creek, all warranties are void. 

IMPORTANT: User is not to exceed the rated weight capacity of this product.  It is the responsibility of the product owner to verify 

the weight of the patron for warranty claim purposes and to ensure that the product is not overloaded.

To initiate a warranty claim, the owner of an Aqua Creek product must provide the place of purchase, in writing, with a full 

description of the product, its serial number, the dates of purchase and installation, and the exact nature of the defect. Within 

thirty (30) days after receipt of a written warranty claim by Aqua Creek, and barring any unforeseen delays, the place of purchase 

will be notified of Aqua Creek’s decision regarding the claim.  All warranty calculations are from date of original purchase at 

manufacturer’s suggested retail price.  Non-payment for product to Aqua Creek may void warranty.

If requested by Aqua Creek, any defective product must be returned, freight prepaid by customer, to Aqua Creek’s designated 

factory location or duly appointed distributor for inspection and/or repair. Aqua Creek will, at its option, repair or replace the 

failed or defective item, and deliver the repaired product or replacement to the customer.  All freight charges are the responsibility 

of the customer. Products returned to Aqua Creek for which Aqua Creek provides replacement under this limited warranty shall 

become the property of Aqua Creek.  A new warranty period shall NOT be established for the repaired or replaced products. Such 

products shall remain under warranty only for the remainder of the original warranty period on the original products purchased. 

This written limited warranty constitutes the final, complete and exclusive statement of warranty terms. No person or organization 

is authorized to make any other specific or implied warranties or representations on behalf of Aqua Creek.

THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WHICH ARE HEREBY 

DISCLAIMED AND EXCLUDED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE OR USE.

THE SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO THE PRODUCTS SHALL BE 

LIMITED TO REPAIR OR REPLACEMENT AT AQUA CREEK’S DESIGNATED FACTORY LOCATION, OR DULY APPOINTED DISTRIBUTOR, 

OR IN PLACE AT AQUA CREEK’S OPTION. IN NO EVENT SHALL AQUA CREEK’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO 

AQUA CREEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT.

IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, 

PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE. 

Aqua Creek Products, LLC

9889 Garrymore Lane

Missoula, MT 59808

Toll Free: (888) 687-3552

Local/Intnl: (406) 549-0769

www.aquacreek.com

9

Summary of Contents for Aqua Walker










Reviews: