OPERATION AND CONNECTION
Please make sure the system and the devices are power off before
establish any connection.
Please refer to the above figure for cable connection
1. Connect the device (PC/CD/MP3) with the Stereo Input
Cable on the back panel.
2. Connect the two satellite speakers to the speaker output
section on the back panel.
3. Connect the AC power and turn on the power button.
4. Adjust the Volume Control on the back panel to your favor
level
SAFETY INSTRUCTIONS
IMPORTANT
Please unplug the system if any of the following conditions exist:
• The power cord or plug becomes frayed or otherwise
damaged.
• Your system has been dropped or the enclosures have been
otherwise damaged.
5
• Liquid has been spilt into a speaker enclosure.
