22
named with “Barcode Scanner HID”. Click “Barcode Scanner
HID” to enter pairing status. If pair successfully, you will hear
a beep.
Note: When the scanner enters the state of matching and it
does not pair withbluetooth successfully within 1 minute, the-
re is 2 times long low sound indicated failing match and return
to scanning mode.
Pairing with 2.4G Dongle
PC terminals, like desktop computer, which is not equipped
with bluetooth, need to pair with Dongle, Dongle Pairing Steps
as follow:
A: Scan Dongle setup Barcode
B: Scan “Compulsory Pair with Dongle Setup Barcode” so
that enter into pairing state.The blue light on the left flickers
quickly.
Compulsory pair with dongle setup code
C: Plug the receiver, if pair successfully, you will hear a beep.
The blue light on the right is always on.
Note: When the scanner enters the state of matching and it
does not detect the receiver successfully within 1 minute, the-
re is 2 times long low sound indicated failing match and return
to scanning mode.
Sound and Vibration Setting
Select the desired to turn on/off the sound or vibration setup
barcode
Turn off the sound