13
www.getaqila.com
Status Indicator
Test Mode &
Normal Operation
Walk Test
LED flashes one time:
Movement is detected.
The LED flashes 5 times and the buzzer
beeps 5 times :
Sensor activated, tamper alarm activated
or indicates low battery level.
Replace the battery immediately if the
battery level is low.
Test Mode: When the sensor is turned on, the LED
indicator flashes 5 times and an alarm sounds 5 times
to enter the test mode. In this mode, each movement
will trigger the sensor and activate the alarm. The
sensor will switch into Work Mode after 20 detections.
Normal Operation: When the test mode ended, this
motion sensor will switch to normal operation, after
one motion is detected, the sensor will go into sleep
mode to preserve energy. Sleep mode will end after 4
minutes. This can save battery energy when the house
is occupied and residents are constantly moving.
When the sensor turned on, the LED indicator flashes 5
times and an alarm sounds 5 times to enter work mode.
Walk through the detection area and pay attention to
the LED indicator to make sure it blinks once it detects
movements.
