10
Smart Security
PANDUAN
PENGGUNA
Remote Control Usage
and Testing
Door/ Window
Sensor Usage and
Testing
Press the SOS button. The small LED on
the remote will light up. Then alarm tone
will immediately sound and the large LED
light on the Aqila Securehub™ will flash red.
Turn off the alarm by pressing the “Disarm”
(image of an open padlock) on your
remote control. Congratulations! Your
AQILA Remote Control is working properly!
Pull out the insulating paper/ Protector.
Activate the alarm system by pressing the
“Awal Arm” button (closed padlock) on
your remote control.
Turn off the alarm by pressing the “Disarm”
(image of an open padlock) on your
remote control. Congratulations! Your
AQILA Door/ Window Sensor is working
properly!
Move the two sensor parts of apart at
least 5 cm away from one another.
