background image

  AQ-300 Operating Manual 

                                           

 

 

             

4

Introduction

 

 

Overview 

 

 

The 

AQ-300 Smart Antenna

 is a total solution GPS receiver, designed 

based on

 SiRF Star II

 Architecture. The AQ Max GPS technology is a low 

power (32mA), cost effective and easy integration GPS system. This 

positioning application meets strict needs such as car navigation, 

mapping, surveying, security, agriculture and so on. 

 

Only clear view of sky and certain power supply are necessary to the unit. 

It communicates with other electronic utilities via compatible dual-channel 

through RS-232 or TTL and saves critical satellite data by built–in backup 

memory. With low power consumption, the 

AQ-300 

tracks up to 12 

satellites at a time, re-acquires satellite signals in 100 ms and updates 

position data every second. The following sleeping mode will save power 

consumption dramatically to allow critical low power applications. 

Features 

 

 

The AQ-300 provides a host of features that make it easy for integration 

and use. 

 

1. SiRF Star II chipset with embedded R3000 level, MIPS I class, 32-bit 

RISC processor available for customized applications in firmware. 

2.  High performance receiver tracks up to 12 satellites while providing 

first fast fix and low power consumption. 

3.  Differential capability utilizes real-time RTCM corrections producing 

1-5 meter position accuracy. 

4.  Compact design ideal for applications with minimal space. 

5.  A rechargeable battery sustains internal clock and memory. It is 

recharged during normal operation. 

6.  User initialization is not required. 

7.  Dual communication channels and user selectable baud rates allow 

maximum interface capability and flexibility. 

8. Optional communication levels, RS-232 and TTL meet ordinary 

application and new fashions of connecting PDA with TTL or RS-232 

output. 

9.  FLASH based program memory: New software revisions upgradeable 

through serial interface. 

10. LED display status: The LED provides users visible positioning status. 

LED “ON” when power connected and “BLINKING” when GPS-6010 

position identified. No more extra device is needed. 

11. Built-in WAAS demodulator. 

12. Built-in magnets for using on top of the car. 

13. Waterproof (1 meter) design for all weather. 

 
 
 

 

 

 
 
 
 
 
 
 

 

Summary of Contents for AQ-300


















Reviews: