- 13 -
✻
✻
✻
✻
80 DEVICE PROGRAMMING
Use this mode to program Powerline Carrier Devices or zone lists for Chime by Zone feature. It is also used to
program the Remote Services Multi-mode (e-mail) event triggers. Press
✻
80 while in programming mode.
Note:
Entering a number other than the one specified may give unpredictable results.
80
Device Programming
0 = Exit mode, upon which this prompt blinks.
1 = Enter mode
A 0 I
DEVICE NUMBER
Enter the 2-digit device number to be programmed
01-08 = X10 device number
09-16 = Multi-mode (e-mail) event triggers
[
✻
] = Continue
00 = Exit Device Programming mode (
displays blinking 80; enter
✻
+ desired data field or menu mode number)
b
aa
DEVICE ACTION
Enter the 1-digit action, 0-3, for the device being programmed (current action is displayed).
0 = No response
3 = Pulse on and off
1 = Close for 2 seconds
[
✻
] = Continue
2 = Close and stay closed
[#] = Return to previous prompt
C
et
START EVENT TYPE
(if applicable)
Enter the 1-digit start event type, 0-3, for the device being programmed.
0 = Not used
3 = Trouble
1 = Alarm
[
✻
] = Continue
2 = Fault
[#] = Return to previous prompt
d
zl
START ZONE LIST
(if applicable)
Enter the 1-digit zone list number, 1-3, or 0 if not used, for the device being programmed.
[
✻
] = Continue
[#] = Return to previous prompt
E
zt
START ZONE TYPE
(if applicable)
Enter the 2-digit start zone type for the device being programmed (see Powerline Carrier Device
Worksheet for zone type/system operation codes later in this manual).
[
✻
] = Continue
[#] = Return to previous prompt
F
zl
STOP ZONE LIST
(if applicable)
Enter the 1-digit zone list number, 1-3, or 0 if not used, for the device being programmed.
[
✻
] = Continue
[#] = Return to previous prompt
IA
zt
STOP ZONE TYPE
(if applicable)
Enter the 2-digit stop zone type for the device being programmed (see Powerline Carrier Device
Worksheet for zone type/system operation codes later in this manual).
[
✻
] = Return to Device Number prompt (A)
[#] = Return to previous prompt
