5
III. Toaster Placement
A. Locate the toaster near a grounded receptacle of the proper configuration (see below). Plug the
cordset directly into receptacle (DO NOT USE AN EXTENSION CORD).
1. In the United States, NEMA5-15R.
2. In Canada, NEMA5-20R.
B. Place the toaster on a flat surface providing the following minimum clearances:
1. Base = one inch (provided with legs installed).
2. Side and back walls = two inch
3. Overhead = Enough space to allow adequate heat displacement.
4.
WARNING:
Failure to provide these clearances will cause unit failure and invalidate warranty
claims.
C. Position toaster where customers will not contact any surface labeled "CAUTION HOT".
NOTE:
do not operate the toaster with the legs removed.
SPECIFICATIONS
DIMENSIONS – AT EXPRESS
