8
7
User can remotely trigger a flash in sync with camera to enable the whole system
to work simultaneously. This is called relay mode.
Use three (or more) Trigmaster Plus 2.4G units. One works as camera remote
trigger held in hand (function switch set to TX/RX); one works as either camera
remote receiver or flash trigger (function switch set to TX/RX); the other one
works as flash receiver connected with flash (function switch set to RX).
Half-press trigger button of remote camera trigger (transmitter indicator lamp
turns green), camera will auto-focus. Full-press trigger button of remote camera
trigger (transmitter indicator lamp turns red), camera shutter is activated while
triggering flash at the same time.
Tips: Just set all Trigmaster Plus 2.4G's channel switch to the same, no need to
be differed.
Triggering Test
Notice
RX
Remote speedlight control
TX/RX
TX/RX
RX
Remote control in hand
Remote shutter control
Remote strobe control
Trigmaster Plus 2.4G is able to wake your speedlight flash. When you stop
using your flash for a period of time, it will go to sleep and become dormant.
When using Trigmaster Plus 2.4G, you can wake up the flash.
With Trigmaster Plus 2.4G, you can control multiple cameras at the same time.
Place one unit on your master camera, and set it to TX/RX mode. Set the other
units on your additional cameras, and set them to RX mode (Don't forget to
attach the remote shutter cable). When you press the shutter on your master
camera, the shutters will be triggered on your additional cameras at the same
time.
Wake up Function
2.4G Compatibility
Multiple Camera Shutter Control
All 2.4G products from the Aputure Trigmaster family are compatible with one
another.
Interlink Triggering Operation
When Trigmaster Plus 2.4G’s function switch is set to RX, press the trigger
button, and the connected flash will be triggered and flash at the same time.
TX/RX
RX
RX
Local Test (Tested by one Trigmaster Plus 2.4G)