6
5
Operation
Use one Trigmaster Plus 2.4G (function
switch set to TX/RX), connected with
camera via remote cable.
Half press the trigger button to auto-
focus (transmitter indicator lamp turns
green); full press the trigger button to
take a picture (transmitter indicator
lamp turns red).
Use two Trigmaster Plus 2.4G units.
With each function switch set to TX/RX,
one works as a camera remote trigger;
while the other works as camera
remote receiver connected to camera.
Half press the trigger button of camera
r e m o t e t r i g g e r t o a u t o - f o c u s
( t r a n s m i t t e r i n d i c a t o r l a m p t u r n s
green); fully press the trigger button to
take a picture (transmitter indicator
lamp turns red).
Use two Trigmaster Plus 2.4G units. With each function switch set to TX/RX,
press trigger button of trigger for 3 seconds (transmitter indicator lamp turns off
automatically, receiver indicator lamp turns red), then release trigger button,
camera starts exposure or continuous shooting. Re-press trigger button, and
camera exposure and shooting stops (both transmitter and receiver indicator
lamps turn off).
Camera Remote Operation
Wired Mode Shutter
Wireless Mode Shutter
Continuous Shooting and
Long-Exposure Settings (Bulb mode)
Flash Trigger Operation
Triggering
Use two (or more) Trigmaster Plus 2.4G units. One works as flash trigger
(function switch set to TX/RX), connected to camera via Hot-shoe or PC cable;
the other one works as flash receiver (function switch set to RX), connected to
flash via Sync cable or Hot-shoe.
Press camera shutter (transmitter indicator lamp turns red), flash is triggered
at the same time.
Local Flash
Trigmaster Plus 2.4G, when used as flash trigger, can also be connected with
one local flash via sync cable.
Press camera shutter (transmitter indicator lamp turns red), and the local
flash will be triggered at the same time.
Tips: Please select wireless mode for longer distance camera remote.
TX/RX
TX/RX
TX/RX
RX