-9-
2. Battery powered
1) Single battery power supply
* Rotate the red rotary ring of the DC input connector clockwise, then pull out to remove the adapter.
* Rotate the red rotary ring of the DC input connector clockwise and then pull it out to remove the
battery case. Do not pull it out forcibly.
* When using a single battery for power supply, be sure to install the battery in the battery slot
corresponding to the red key;When removing the battery, press the red lock button to pull out
the battery. Do not pull it out forcibly.
* Single battery: Voltage 6~8.4V; Recommended ≥6.6A continuous discharge.
1. Ac power supply
The power supply
AC 100V-240V
~ ~
Summary of Contents for LightStorm LS 60d
