-7-
1
2
1
2
3. Setting Up the Lamp Head
If using a 5/8in / 16mm stand (Baby Pin), then mount the Lamp Head onto the stand,
and fix it in place using the T-Handle/Mounting Screw on the Baby Pin Receiver.
If using a 1.125in / 28mm stand (Junior Pin), then mount the Lamp Head into the Junior
Pin receiver, and fix it in place using the T-Handle on the stand. Loosen or tighten the
handbrake locking mechanism on the yoke to adjust the fixture's angle of tilt.
4. Lightning Clamp Operation Instructions
1) Clamp the Lightning Clamp onto a light stand.
2) To attach the control box, rotate the release lever to unlock the quick-release plate, then
mount the control box onto the Lightning Clamp (the release lever will spring back).
3) To remove the control box, grasp it firmly, then unlock the quick-release plate by turning
the release lever, and detach the control box.
