2.2 Accessing Lighting Modes
-16-
NO
YES
Factory Reset
Battery Power Option
Wake up Batteries
Full Battery Power
Press the LIGHT MODE button on the control box to enter the mode:
CCT, HSI, RGB,
XY, RGB, Source,
and
GEL.
2.1.13)
Battery Power Option
Press the MENU button to enter the menu interface, rotate the select wheel and short
press to Battery Power Option.
Wake Up Battery
: When you need to activate the lithium battery from overdischarge
protection. Select the lithium battery specification 14.4V/26V and enter the Wake
Up Batteries interface, confirm Activate to output 3A current in order to activate
the lithium battery; After activation, check whether the lithium battery has a voltage
output. If so, the activation is successful, otherwise the activation fails.
Full power output
: a single lithium battery meets 360W continuous output (14.4V
lithium battery maximum output current 30A, 26V lithium battery maximum output
current 15A), two lithium batteries can meet the input power requirement of 720W,
and the lamp can achieve 100% illumination Output.
The factory settings list :
Light mode: Intensity 50%, CCT 5600K;
Language: English
Fan Mode: Smart
Dimming Curve: Linear
Studio Mode: OFF
Control System: Bluetooth
DMX: Address 001, Hold Last Settings, DMX Termination OFF
