APT AWP 2 Safety & Operating Instructions Manual Download Page 7

AWP 2, AWP 3

7

(doc no.)

SAFETY & OPERATING INSTRUCTIONS

CAUTION    Skin eczema

Hydraulic oil can cause eczema if it comes in contact

with the skin.

Avoid getting hydraulic oil on your hands.

Always use protective gloves when working with

hydraulic oil.

Wash hands after contact with hydraulic oil.

Operation, precautions

WARNING    Operating pressure

If the maximum operating pressure for the hydraulic

machine is exceeded, it can result in material damage

and personal injury.

Always run the hydraulic machine with the correct

operating pressure. See "Technical data".

DANGER    Unprotected impeller

An unprotected impeller can cause serious personal

injury

Never run the machine without suction strainer

and base plate.

WARNING    Unexpected movements

The machine is exposed to heavy strains when used.

Accessories may break due to fatigue after a certain

amount of use. If the accessory breaks or gets stuck,

there may be sudden and unexpected movement

that can cause injuries. Furthermore, losing your

balance or slipping may cause injury.

If the discharge hose is kinked, it could be forced

out of the operator's hands, which could cause

injury. Always remove kinks, before the pump is

started.

Pay attention not to lose balance when

submerging or taking out the pump from the

water, use a proper lifting device.

Always inspect the equipment prior to use. Never

use the equipment if you suspect that it is

damaged.

Make sure that the pump and its accessories are

clean and free of grease and oil.

Moving parts may crush and cut, never check

bores or passages with hands or fingers.

Never strike or abuse the equipment.

Check regularly for wear on the accessories, and

check whether there are any signs of damage or

visible cracks.

Pay attention and look at what you are doing.

WARNING    Projectiles

During operating, particles or jets of liquid may

become projectiles and cause personal injury by

striking the operator or other persons. To reduce

these risk:

Use approved personal protective equipment and

safety helmet, including impact resistant eye

protection with side protection.

Make sure that no unauthorised persons trespass

into the working zone.

Keep the workplace free from foreign objects.

Jets of liquid from the discharge hose could

contain solids travelling at a great speed. Do not

direct the liquid jets towards other personnel.

WARNING    Slipping, tripping and

falling hazards

There is a risk of slipping or tripping or falling, for

example tripping on the hoses or on other objects.

Slipping or tripping or falling can cause injury. To

reduce this risk:

Always make sure that no hose or other object is

in your way or in any other person's way.

Always make sure you are in a stable position with

your feet as far apart as your shoulders width and

keeping a balanced body weight.

DANGER    Electrical hazard

The machine is not electrically insulated. If the

machine comes into contact with electricity, serious

injuries or death may result.

Never operate the machine near any electric wire

or other source of electricity.

Make sure that there are no concealed wires or

other sources of electricity in the working area.

WARNING    Involuntary start

Involuntary start of the machine may cause injury.

Keep your hands away from the start and stop

device until you are ready to start the machine.

Learn how the machine is switched off in the event

of an emergency.

Stop the machine immediately in all cases of

power supply interruption.

7

3392 5187 01a | Original instructions

Safety and operating instructions

Summary of Contents for AWP 2





















Reviews: