APstorage Installation / User Manual
9
3. Installation
3.2 Select Mounting Location
1. PCS should be installed on a solid surface, where is suitable for PCS’s dimensions
and weight.
2. Do not install PCS in a confined space with no ventilation.
3. If the PCS is installed outside, it should be protected under shelter from direct sunlight or bad
weather conditions (like snow, rain, lightning, etc). Fully shielded installation locations are
preferred.
4. Please try to install APstorage vertically on the wall.
5. Make sure that the PCS is mounted “face-up”: Product logo is visible after installation.
6. Leave enough space around APstorage. The specific requirements are as follows:
WARNING:
APstorage Sea system cannot be installed near flammable, explosive or
strong electro-magnetic equipment.
500mm
300mm
300mm
300mm
