3) When registering the fingerprint, the registered finger must completely cover the fingerprint
sensor in order to increase the fingerprint recognition rate.
4) The fingerprint registration must be completed before using the USB memory. Carefully follow
the user manual instruction.
5) This device can record up to 3 different fingerprints and save them in an order
6) If the authentication fails for 5 consecutive times after the fingerprint registration, the green
LED and the red LED flash alternately. In this case, you have to disconnect and reconnect the USB
memory.
7) User data deletion
Having presented a total of 15 unregistered fingerprints, all the data is erased. (Existing data
cannot be recovered by the manufacturer and we shall not be liable for the deleted data.)
8) If you connect the USB memory directly to the computer without using the extension cable,
depending on the computer’s USB terminal location, plug it conveniently as the fingerprint sensor
can be located either on the front or the back side.
9) Be sure to click the ‘Safely Remove Hardware and Remove Media’ button to eject this device
from the computer. Removing this device without clicking the button may result in data loss.
5. How to register / reset your fingerprint
-Connect the USB memory to the USB terminal of the computer directly or connect via extension
cable.
1)
First fingerprint registration
Green LED On> Place the finger to the direction you wish to register on the sensor. (Please let the
fingerprint completely cover the sensor.)
When the fingerprint is recognized, the green LED flashes 2 times and vibrates 1 time. Then lift off
your finger.
-Notice-
- When registering the fingerprint, the sensor must be completely covered with fingerprint in order
to increase the recognition rate.
- For fingerprint registration, please register three kinds of fingerprints at once*
(*This device can record up to 3 different fingerprints and save them in order. These 3 fingerprints are
recorded by scanning each fingerprint 4 times in different directions.)
- If the fingerprint registration exceeds the fingerprint recognition waiting time(about 40seconds),
or if the USB memory is connected to the computer again, the registration will restart from the
first fingerprint.
Summary of Contents for SafeM YMA-1321
Page 1: ......
