www.aps-supply.com
APS USA
610 Gateway Center Way, Suites J & K
San Diego, CA 92102 USA
P: 1 619 263 4164
F: 1 619 263 6814
APS Australia
Unit 1, 72 Kent Way
Malaga WA 6090 Australia
P: 61 (8) 9248 4419
F: 61 (8) 9248 4901
APS: Singapore
Colombia
Chile
Perú
Brasil
CAMERA SYSTEMS
APS-SUPPLY.COM
Product Description
The PreView® VideoLink is a device used to integrate a PreView Object Detection
sensor with a blind spot camera system. The PreView VideoLink uses the blind
spot camera’s monitor to display PreView distance information to the vehicle
operator.
The VideoLink consolidates the displayed information into a common point of
focus for the operator rather than forcing the operator to monitor multiple devices
in the vehicle cab. This is achieved by replacing the PreView display with the
VideoLink component, where the visual alert and ranging information from the
PreView sensor (or sensors) is modulated right onto the existing video monitor,
sharing the resulting video image on a single monitor.
During times when no object is present, the VideoLink graphic information is static
and unobtrusive. Conversely, during times when an object is present, the active
alert of the PreView VideoLink draws the operator’s attention to the monitor using
a combination of a dynamic graphics display as well as audible tones, where the
standard PreView system object warning tones are also modulated right onto
the existing video monitor, sharing the camera audio sound (if so equipped). The
information is positioned for minimal interference with the camera image and the
standard five-zone PreView display format is preserved.
The VideoLink reduces installation time, installation costs, and dash clutter when
installing a PreView Object Detection system on vehicles.
The PreView VideoLink consists of three major components: an environmentally
sealed housing containing the electronics, a cable that interfaces to the camera
and monitor, and an interface cable to the PreView radar sensors. The PreView
VideoLink can be used with many different manufacturers of camera systems. All
that is required is the proper camera interface cable.
