COLLISION ALERT SYSTEMS
APS-SUPPLY.COM
www.aps-supply.com
APS USA
610 Gateway Center Way, Suites J & K
San Diego, CA 92102 USA
P: 1 619 263 4164
F: 1 619 263 6814
APS Australia
U48 / 9 Vision Street,
Wangara WA 6065 Australia
P: 61 (8) 9302 2369
F: 61 (8) 6305 0047
APS: Singapore
Colombia
Chile
Perú
Brasil
This screen allows access to the system settings and provides display information.
The Information icon provides access to the firmware, boot loader, audio file
revisions, the display’s serial number, and a short functional description of the
system. To view the system settings and configure the system, press the icon.
To return to the Home screen at any time simply press the icon. When in any
of the sub-menus, the previous screen can be reached by pressing the icon.
Configuring the Display
Before configuring the display, the display and sensor (see sensor manual for
sensor installation instructions) must be installed and powered. After the display
powers up, the Home screen will be present.
Settings
Once the Settings icon has been selected the Enter Passcode screen will be
visible as shown below:
The default Passcode is 12345. Once the Passcode has been entered, press the
ENTER button to proceed to the Settings screen.
Figure 2. Configuring the Display
Figure 3. Enter Passcode Screen
