Rev. 20220201
3
iArmor
®
Customer Support: [email protected]
STEP 1
Start the installation under the driver side of the vehicle. Deter-
mine Driver Side Front, Center and Rear Mounting Locations
(Figs 1 & 2)
.
The instruction here is for your reference only. We strongly
recommend the professional installer for best result. We are not
responsible for any damage caused by the installation.
(Fig 1) Driver Side Front Mounting Location
STEP 2
Attach the Driver Front Mounting Bracket to the body panel by
using (2) M8X1.25-30mm Hex Bolts, (2) M8 Large Flat Wash-
ers and (2) M8 lock washers. Don’t fully tighten at this time,
(Figs 3 & 4).
Remove Plastic Plugs (If
Equipped) Or Hex Bolts
From Threaded Holes
(Fig 2) Driver Side Center/Rear Mounting Location
Front
Front
(Fig 3) Driver Front Mounting Bracket Installation
(2) M8X1.25-30mm Hex Bolts
(2) M8 Lock Washers
(2) M8 Large Flat Washers
(Fig 4) Driver Front Mounting Bracket Installed
STEP 3
Repeat
Step 2
to install the remaining driver side center and
rear mounting brackets
(Fig 5)
.
Note: Driver/Passenger Center and Rear Mounting Brack-
ets are universal.
Front