-1-
I. SYSTEM INVENTORY
A. Base Unit
B. One (1) foot pedal
C. Laser pointer assembly
D. Power cord
E. Blow-through nozzle assembly (Model GW-10A only)
F. Solder nozzle
NOTE: Any section refering to blow-through (blowoff) nozzle pertains only to systems
with that option included.
II. UTILITIES
Electrical Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STD: 120VAC, 60 Hz, 20 Amps max
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
optional 220 VAC, 50 Hz, 10 Amps max
Compressed Air Option (clean, dry air) . . . . . . . . . . . . . . . . . . . . . . . . . . 50-100 psi, 1 CFM
Solder Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 lbs (23 Kg)approx.
WARNING
FAILURE TO READ AND FOLLOW THESE INSTRUCTIONS IN THEIR ENTIRETY PRIOR
TO INSTALLATION AND OPERATION MAY VOID WARRANTYAND RESULT IN PER-
SONAL INJURY AND DAMAGE TO PROPERTY! Be sure that all personnel who are to
operate this machine are first fully familiar with this manual and are instructed on proper
safety procedures, practices and precautions.
CAUTION SHOULD A LWAYS BE USED WHEN SYSTEM IS IN OPERATION DUE TO
HIGH TEMPERAT U RE!
