Apriva BT 200-T Installation and User’s Guide
02/16/2010
Page
|
8
Apriva ISS
Proprietary
7. Interface with Windows Mobile
To pair with the Sensa Secure Mobile Email System for
the first time after a Sensa client installation, use the
following steps:
1. Install the
Sensa
client on the PDA by running the
appropriate
*.CAB
file (detailed above)
2. After the install, the mobile device software will reset
and the
Sensa Guard
data-at-rest PIN and the PIN
pad will be displayed.
3.
Sensa Guard
is now configured for a tethered, USB
pairing process.
4. Connect the BT200T (the
PDA
jack) to the mobile
device with the USB cable
and supplied adapter and
insert your CAC (Press the
ON/OFF
switch on the
BT200T) and enter your CAC PIN to unlock the mobile
device.
5. On the mobile device, run the Sensa Utility program using
the
Programs
shortcut.
6. Select the
Smart Card Reader
button.
7. Select
USB
(the default) and then the
Pair
button. (See
Figure 2) The tethered pairing operation will take40-60
seconds to complete.
8. On display of a pairing complete message, select
OK
to
close the message box and select the connection method
Bluetooth
. Wait until the hourglass disappears before
removing the cable or CAC.
Do not remove CAC or the USB cable during this process. If
you do, you will have to repeat the pairing process for proper transition to
Bluetooth operations.
Figure 2 -- USB/Bluetooth
Pairing
