3
ENGLISH
PRODUCT CHARACTERISTICS AND USAGE
The 43901/001 and 43901/005 remote controls are radio transmitters that allow control of the tubular motors with a built-in radio
receiver.
Model 43901/001 is one-channelled while model 43901/005 is five-channelled.
Attention:
For the 5-channel remote control (43901/005), the LEFT
◄
key (sliding up) and the RIGHT
►
key (sliding down)
have the function of channel selection. Using the keys on the remote control (UP-STOP-DOWN), when all 5 LEDs are lit, the
opening and closing can be controlled centrally.
Warnings:
To avoid a reduction in functionality, do not expose the remote control to humidity and mechanical stress. When using
the remote control, if you notice a decrease in sensitivity that makes it so you have to come much closer to the motor to control it,
replace the battery.
MOUNTING THE SUPPORT ON THE WALL
The box is supplied with:
•
1 plate for fixing the wall bracket
•
1 wall bracket to insert the remote control
•
2 sleeves Ø 4mm + 2 screws
Attention:
Do not mount the support next to metallic structures that may diminish its capacity.
INSERTION AND REPLACEMENT OF BATTERY
•
Remove the cap on the back, by sliding it.
•
Insert the battery, paying attention to the polarity.
•
Close the cap.
Attention:
The drained lithium batteries are special waste and must be disposed of according to legal provisions.
TECHNICAL CHARACTERISTICS
Power supply
1 lithium battery 3 V type CR2430
Autonomy
2 years (normal use)
Radio capacity
more than 200m in free field - 35m through two walls
Radio Transmission
with bidirectional frequency modulation 433.05 – 434.79 MHz.
Operating temperature
-20°C ÷ +55°C
Insert the wall bracket
into the plate screwed
on the wall.
Drill the wall and fix the
plate with the screws.
43901/001
UP
▲
Stop
Down
▼
LED
channel
43901/005
UP
▲
Stop
Down
▼
Right
►
Left
◄
LED
channel choice
Battery compartment
P2 Key
