APRILIA RSV MILLE, Workshop Manual

Page: 35 / 386

GENERAL INFORMATION
1 - 24
RSV mille
1.9.2 USE OF CONSUMABLES
For use descriptions that have been involuntarily omitted
in this list and for any further information on the use of ex-
pendable materials, see 0.4.2 (SPARE PARTS CATA-
LOGUES). (*) = see 1.6 (LUBRICANT CHART).
(**) = see 1.9.1 (PRODUCT PROPERTIES).
xxxxxxx N.A. = not available
APRILIA
part# (product) Description of use
aprilia part# 8116050 (engine oil) (*) – Assembly of rivets on fork, dashboard/front fairing mount, saddle
support and frame.
– Assembly of frame/engine and frame/fork adjusting bushes.
– Assembly of fairlead screws on frame.
– Insertion of steering head bearings.
– Steering head upper bush.
– On timing intermediate gear roller bearings.
– On lower countershaft thrust washer.
– Clutch disengaging shaft.
– On valve stems and valve lifter buckets.
– On valve guide oil seals.
– On camshaft housings.
– On the timing chain tightener.
– On double starter gear and idler gear pins.
– On the freewheel gear/freewheel contact surface.
– On the freewheel inner contact surface.
– On the piston segment seats.
aprilia part# 0897651 [LOCTITE
®
243 blue (10
cm³)] (**)
– Fastening of steering shock absorber bush.
– Fastening of rear brake caliper lock pin.
– Fastening of pinion.
– Fastening of rear brake lever pin.
– Fastening of cooling electrofan on support.
– Fastening of fuel return pipe connection.
– Fastening of fuel filler cap.
– Throttle cable pullet fastening nut.
– Throttle cable support bracket fastening screws.
– Throttle valve pin fastening nut.
– Throttle valve potentiometer fastening screws.
– On coolant pump centre fastening screw.
– On cylinder joining bracket fastening screws.
– On engine half-casing bearing lock screws.
– On the cylinder fastening stud bolts (engine crankcase half side).
– On driving shaft position sensor fastening screws.
– On the camshaft position sensor fastening screws.
– On index lever and plate fastening screws.
– On driving shaft fastening nut.
– On timing gear fastening screws.
– On upper countershaft counterweight fastening nut.
– On intermediate timing gear bearing support lower fastening
screw.
– On the thread of the coolant duct plug on the rear cylinder.
– On the thread of the engine oil pressure sensor.
– On the thread of the stator fastening screws.
aprilia part# 0898011 (fluorescent green LOC-
TITE
®
275) (**)
– On the thread of the cylinder coolant inlet and outlet pipes.
aprilia part# xxxxxxx N.A. (LOCTITE
®
572)
– Fastening of coolant thermal switch.
– Fastening of the coolant draining screws positioned on the
radiators.
Follow
ã
Release 00/2002-10
- 00