manualshive.com logo in svg

APRILIA RST MILLE FUTURA - PART 1 2000, Manual

Share
Download
APRILIA RST MILLE FUTURA - PART 1 2000 Manual Download Page 30

30

use and maintenance   RSV mille - RSV mille R

5.,/#+).',/#+).' 4(%

',/6%4//, +)4 #/-0!24-%.4

#/6%2

w

◆

Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).

◆

Introduce the key (1) in the lock.

◆

Turn the key (1) anticlockwise, raise and
withdraw the glove/tool kit compartment
cover (2) from behind.

A useful compartment is available under
the glove/tool kit compartment cover; to
reach it, it is sufficient to release and re-
move the flap (3).

NOTE 

Before lowering and locking the

glove/tool kit compartment cover (2), make
sure that you have not left the key in the
glove/tool kit compartment.

To lock the glove/tool kit compartment
cover (2): 

◆

Introduce the lower front projections in
the relevant recesses on the rear part of
the fairing.

◆

Position the glove/tool kit compartment
cover in its seat and press it, so that the
lock snaps.

a

WARNING

Before leaving, make sure that the
glove/tool kit compartment cover (2) is
correctly locked.

RSVmille-R-UK.book  Page 30  Friday, November 17, 2000  3:13 PM

Summary of Contents for RST MILLE FUTURA - PART 1 2000



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands