APRILIA mille SL, Manual

Page: 83 / 96

83 use and maintenance SL mille
LOW BEAM BULB
a
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
◆
Grasp the bulb electric connector (10),
pull it and disconnect it from the bulb (3).
◆
Move the protection element (11) with
your hands.
◆
Release the check spring (12) positioned
at the rear of the bulb socket (13).
◆
Extract the bulb (3) from its seat and re-
place it with a new one of the same type.
NOTE
Insert the bulb in the bulb socket,
making the relevant positioning seats coin-
cide.
#(!.').' 4(% &2/.4 !.$ 2%!2
$)2%#4)/. ).$)#!4/2 "5,"3
Carefully read p. 81 (BULBS).
◆
Position the vehicle on the side stand on
firm and level ground.
◆
Unscrew and remove the screw (14).
NOTE
While removing the protection
screen, proceed carefully in order not to
break the cog.
◆
Remove the protection screen (15).
a
WARNING
Upon reassembly, correctly position the
protection screen in its seat.
Tighten the screw (14) moderately and
carefully, to avoid damaging the protec-
tion screen.
◆
Press the bulb (16) slightly and rotate it
anticlockwise.
◆
Extract the bulb (16) from its seat.
a
CAUTION
Insert the bulb in the bulb socket, mak-
ing the two bulb pins coincide with the
relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
a
CAUTION
If the bulb socket (17) goes out of its
seat, insert it correctly, making the bulb
socket opening coincide with the screw
seat.