APRILIA mille SL, Manual

Page: 19 / 96

19 use and maintenance SL mille
◆
Press the push button
B
to change the
unit of measurement from “ km ” to “ mi ”
(from “ km / h ” to “ MPH ”) and viceversa.
◆
To confirm the setting, press the push
button
A
for about 5 seconds.
SETTING THE INSTANTANEOUS, MAXI-
MUM AND AVERAGE SPEED (LEFT DIS-
PLAY)
NOTE
Two seconds after the vehicle has
started moving, the instantaneous speed is
automatically shown on the display, even if
a different function is set.
When the ignition key is rotated to position
“
n
”, the instantaneous speed (13) and the
partial number of kilometres/miles covered
(trip 1) (10) appear on the left display.
Resetting “trip 1” (10): with the odometer
set on the instantaneous speed function,
press the push button
R
for about 2 sec-
onds.
◆
To display the maximum speed (14) and
the distance “trip 1” (10), press the push
button
B
for about 1 second.
The writing “ V max ” (15), the maximum
speed (14) and the distance “trip 1” (10)
are displayed.
Resetting the maximum speed (14): with
the odometer set on the “
V max ” function,
press the push button
R
for about 2 sec-
onds.
NOTE
The measurement of the maxi-
mum speed is relevant to the distance cov-
ered from the last setting to zero of the max-
imum speed itself. The distance “trip 1” (10)
shown on the display indicates the number
of kilometres/miles covered from the last set-
ting to zero, to the distance “trip 1”.
◆
To display the average speed (16) and
the distance “trip 2” (17), press the push
button
B
again for about 1 second.
The writing “ AVS ” (18), the average speed
(16) and the distance “trip 2” (17) are dis-
played.
Resetting the average speed (16) and the
distance “trip 2” (17): with the odometer set
on the “
AVS ” function, press the push but-
ton
R
for about 1 second.
NOTE
The measurement of the average
speed is relevant to the distance “trip 2”
(odometer).
The distance “trip 2” (17) shown on the dis-
play indicates the number of kilome-
tres/miles covered from the last setting to
zero.
If more than 1000 km (625 mi) are covered
without setting “trip 2” to zero, the value of
the average speed will be wrong.
◆
To display the instantaneous speed (13)
and the distance “trip 1” (10), press the
push button
B
again.