APRILIA ATLANTIC 500, Workshop Manual

Page: 104 / 170

Electrical system
chap. 6
6-25
6
Release 00 2002-09
Atlantic 500
MULTIFUNCTION LCD
When the ignition key (1) is turned to position “ ”, on
the multifunction LCD all segments are activated (this
performs a functional test of the components) and the
last function set after the vehicle was stopped will be
displayed.
After the first 1,000 Km and every 6,000 Km there-
after, the message SERVICE appears on the
display.
In this case contact an
aprilia dealer to carry out
the operations described in the scheduled mainte-
nance chart, see pages 2-3 (SCHEDULED MAINTE-
NANCE CHART).
CAUTION
PUS
H
Z
A
D
I
1
2
The various functions are selected and then shown on
the display by pressing the button (MODE) (2) located
on the controls on the left side of the handlebar.
The following segments make up the multifunction
LCD:
Stopwatch function indicator (3), scheduled mainte-
nance due icon (4), average speed icon in miles per
hour (mph) (5), average speed (6), battery voltage
icon (7), average speed expressed in kilometers per
hour icon (Km/h) (8). (The same icon is used for the
“consumption levels” function expressed with the
symbol Km/l), consumption levels espresso in ml/G
(used only for the
versions) (9), maximum
speed icon (10), external temperature icon expressed
in degrees Celsius (
°
C) (11), external temperature
icon expressed in degrees Fahrenheit (
°
F) (12), six-
digit display of the values for the functions set and
identified by the corresponding icons (13).
Pressing the MODE key, the following functions are
obtained in sequence:
External temperature in
°
C
↓
MODE
Maximum speed (Vmax) + km/h or MPH
MODE
↓
Average speed AVG (Km/h or mph)
MODE
↓
MODE
↓
Battery voltage (Vbatt)
MODE
↓
Fuel consumption (km/l or ML/G)
MODE
↓
Stopwatch (LAP)
MODE
Kilometers remaining until next scheduled
maintenance (SERVICE)
↓
LAP
SERVICE
mph
AVG V
BATT
Km/h ml/G Vmax
°
C
°
F
CEV
3
4
5
6
7 8
9 10
11
12
13
" "
.