Aprilaire 8820 Owner'S Manual Download Page 21

40

41

Visit us on-line at 

www.aprilaire.com

 to register your Aprilaire product . If you do not have on-line access, please mail a postcard with your 

name, address, phone number, product purchased and date of purchase to: Research Products Corporation, P .O . BOX 1467, Madison, WI 53701 .

Your Warranty Registration information will not be sold or shared outside of this company.

WARRANTY REGISTRATION

THERMOSTAT FIVE YEAR LIMITED WARRANTY

Your Research Products Corporation Aprilaire

®

 Thermostat is expressly warranted for five (5) years from date of installation to be free from defects 

in materials or workmanship . 
Research Products Corporation’s exclusive obligation under this warranty shall be to supply, without charge, a replacement for any thermostat 
which is found to be defective within such five (5) year period and which is returned, together with the date of installation, no later than thirty 
(30) days after said five (5) year period by you to either your original supplier or to Research Products Corporation, Madison, Wisconsin 53701 .
THIS WARRANTY SHALL NOT OBLIGATE RESEARCH PRODUCTS CORPORATION FOR ANY LABOR COSTS AND SHALL NOT APPLY TO DEFECTS IN 
WORKMANSHIP OR MATERIALS FURNISHED BY YOUR INSTALLER AS CONTRASTED TO DEFECTS IN THE THERMOSTAT ITSELF .
IMPLIED WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE AFORESAID 
FIVE YEAR PERIOD . RESEARCH PRODUCTS CORPORATION’S LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OTHER THAN 
DAMAGES FOR PERSONAL INJURIES, RESULTING FROM ANY BREACH OF THE AFORESAID IMPLIED WARRANTIES OR THE ABOVE LIMITED 
WARRANTY IS EXPRESSLY EXCLUDED . THIS LIMITED WARRANTY IS VOID IF DEFECT(S) RESULT FROM FAILURE TO HAVE THIS THERMOSTAT 
INSTALLED BY A QUALIFIED HEATING AND AIR CONDITIONING CONTRACTOR . IF THE LIMITED WARRANTY IS VOID DUE TO FAILURE TO USE A 
QUALIFIED CONTRACTOR, ALL DISCLAIMERS OF IMPLIED WARRANTIES SHALL BE EFFECTIVE UPON INSTALLATION .
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, 
so the above exclusions or limitations may not apply to you .
This warranty gives you specific legal rights and you may also have other rights which vary from state to state . 

FCC DECLARATION

Compliance Statement (Part 15.19)

This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:

  1 .  This device may not cause harmful interference, and 

  2 .  This device must accept any interference received, including interference that may cause undesired operation .

Warning (Part 15.21)

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment .

FCC Interference Statement (Part 15.105 (b))

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These 

limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates uses and 

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 

the interference by one of the following measures:

   Reorient or relocate the receiving antenna .

   Increase the separation between the equipment and receiver .

   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .

   Consult the dealer or an experienced radio/TV technician for help .

FCC RF Radiation Exposure statement

To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed 

to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna 

or transmitter .

Summary of Contents for 8820
























Reviews: