22
23
PROGRAM SCHEDULE AND HOLDS
Press [MENU]
to enter the main menu .
Press [SET CLK/DATE]
to enter clock menu .
SET TIME AND DATE
Press
or
to set the hour .
Press [Next]
, then
or
to set the minute .
Press
[Next]
, then
or
to set the month .
Press [Next]
, then
or
to set the day .
Press [Next]
, then
or
to set the year .
Press [DONE]
to save and exit, Or
[CANCEL]
to exit
without saving . The thermostat will save and exit if
nothing is pressed within 20 seconds .
Note:
If configured to do so, the home automation
system can send periodic time updates to the thermostat .
If the thermostat is configured to be used with an
Aprilaire account the thermostat’s time and date will be
updated periodically, and will update automatically for
daylight savings .
UNDERSTANDING PROGRAM SCHEDULES
PROGRAM SCHEDULE AND HOLDS
The daily schedule is split into four sections:
WAKE:
Temperature you would prefer to wake up to .
LEAVE:
Temperature when you are away from the house .
RETURN:
Temperature you would prefer to return home to .
SLEEP:
Temperature you would prefer while sleeping .
The times shown in the table below are the defaults . The start time and temperature of each section can be changed
to fit your schedule . (See Changing Program Schedules section on pages 25-26 .)
This thermostat is pre-set to use the following program settings (see table below) . We recommend these settings,
since they can reduce your heating/cooling expenses . The fan program is pre-set to AUTO for all events .
Event designator
Start time
Setpoint
Fan
Heat
Cool
WAKE
6:00AM
70°F (21°C)
78°F (25 .5°C)
AUTO
LEAVE
8:00AM
62°F (16 .5°C)
85°F (29 .5°C)
AUTO
RETURN
5:00PM
70°F (21°C)
78°F (25 .5°C)
AUTO
SLEEP
10:00PM
62°F (16 .5°C)
82°F (27 .5°C)
AUTO
