3
INSTALLATION INSTRUCTIONS
Step 2.
Attach the horizontal profile caps (No.12,13)
then fix the pieces together using 2×ST3.5×45 fixing screws through
the metal profile of the fixed panels and into the end of the horizontal rail,then attach the other fixed panel to the
horizontal profile in the same way.Once both fixed panels are attached to the bottom horizontal rail repeat for the
top horizontal.
Step 1
Step 1.
Drop the silicone into the groove of the raill profiles along with the pre-fitted seal,then push the top and bottom profiles (
No.4,5
)
into the fixed glass panels (
No.6,No.7
), make sure the fixed glass panels (
No.6,No.7
) are pushed into the gaskets (
No.22,23
)
fully as shown(A).
Note
: Put a little bit of silicone in the corner of the profile cap and the horizontal profile as shown in diagram (B),
the other side needs sealing in the same way (C).
Note:You may find it will be more easy to assemble if the curved edge of the fixed glass panel has been push into the gasket
first.
Step 2
B
Inside enclosure
Outside enclosure
C
Outside enclosure
Inside enclosure
A1
Step 1
A2
