6.3 How to change and setup parameters
6.3.1Setup system parameters
A: Press MENU THRICE: display as follows
1.0 VIEW ALARMS
ALARMS LIST EMPTY or INPUT SIGNAL LOSS or IN TS NO SIGNAL
B: Press UP/DOWN to view/change parameters or select function
▼
1.0 VIEW ALARMS
CLEAR ALL ALARMS
C: Press ENTER to store /execute: display as follows
1.0 VIEW ALARMS
ALL ALARMS BE CLEARED
D. Move Left/right to recycle sub-menu
►
1 1.1 SET IP ADDR
120.120.120.160
►
2 1.2 SET NET MASK
255.255.255.000
►
3 1.3 SET NET GATE
120.120.120.001
►
4
1.4 NET STATUS
NOT CONNECTED or CONNECTED
►
5 1.5 SERIAL No.:
XXXXXXXXXXXXXXXXXX(18-digit)
►
6 1.6 VERSION
H:XX.XX S:XX.XX
►
7 1.7 GET PRESET PARAMETER
*FACTORY PRESET
►
8 RELOAD IN INFO
*RELOAD IN CHANNEL INFO
.
Press ENTER to resume the factory setup.
E. In any status, press LOCK to exit. Press ENTER to exit current operation
6.3.2 Setup input port parameters
A. Press MENU twice: display as follows
2.00.0 CHA01 PROGRAMS
ALL HAVE: 004
B. Press LEFT/RIGHT: view the program information
4
1 2.00.1 CHA01 IN SIGNAL
INPUT 188 TS PACKET
4
2 2.00.2 CHA01 TS_ID
00001
4
3 2.00.3 CHA01 ON_ID
00001
6-2
