y
Analog Output (Pre Out)
1 x Balanced Output (XLR)
1 x Unbalanced Output (RCA)
y
Analog Input
1 x Balanced Input (XLR)
2 x Unbalanced Inputs (AUX 1 is used as Phono input when P1 Phono Module is installed)
Class A Push-Pull Output Stage
CS3310 Volume Control Chip
Two entirely separate toroidal transformers for the Digital and Analog sections
Upsampling (24Bit/192kHz) Digital to Analog Converter
(Rate Selectable)
DAC section of the Stello DP200 supports an upsampling up to 24Bit/192kHz. And the sampling rate is
selectable by the user. All Sampling Rate Selection and Digital Input Selection can be made using either the front
panel buttons or the remote control. 4 Digital Inputs are supplied. They are one AES/EBU (Balanced), 2 Coaxial
(RCA), and an Optical (Toslink) Input.
Specially designed digital filtering circuitry is adopted at the end of Delta-Sigma DAC section. This 6th order
digital filter, which is not usual for a normal DAC, provides excellent signal to noise ratio and much cleaner
background to allow the beautiful timbre of the music to shine through.
For a jitter-free signal, special PLL circuit is applied in the DAC section.
Headphone Amplifier
The DP200 is equipped with a headphone jack on the front panel. The headphone amplifier in the DP200 is not
just a combination of some OP amps like the ordinary mid-priced headphone amplifiers in the market.
Custom designed headphone interface circuitry is adopted at the end of the analog stage which is activated to
support the full functionality of DP200 as a pure headphone amplifier.
Stello DP200 DAC/PRE
4
