ADC-1 Upsampled Digital Output Board
When ADC-1 module is installed, the DP200 automatically recognizes it and does analog to digital conversion.
All inputs can be routed to digital output ports by the ‘RECORD’ button. Upsampled output also can be selected
by the ‘RECORD’ button. Default setting without ADC-1 module of Jumper (J30) is pin 1-2 connected (WO/ADC).
When ADC-1 board is installed, jumper (J30) should be changed to connect pin 2 & 3 as the [Fig 8].
[Fig. 8] Jumper location when ADC1 is installed
J 3 0
1 2 3
WITH ADC1
WITHOUT ADC1
J 1 9
Stello DP200 DAC/PRE
15
