manualshive.com logo in svg

Apria Healthcare 3B Medical Luna II, User Manual

Share
Download
Apria Healthcare 3B Medical Luna II User Manual Download Page 7

  

|

 7

Questions? Call 

877.265.2426

STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT

1.

4.

2.

5.

3.

Nasal Mask

1.  Release the lower strap magnets from the frame of the mask. Make sure the logo on 

the headgear is facing outward. While holding the mask against your face, pull the 
headgear over your head.

2.  Position the lower straps so they both sit below the ears. Bring each of the magnets 

up to meet their corresponding clips on the frame.

3.  Adjust the fastening tabs on the upper straps until the mask feels even and stable.  

Do not overtighten. Reattach the fastening tabs.

4.  Repeat Step 3 with the lower straps. Reattach the fastening tabs. 

5.  Connect the hose to the front of the mask. Ensure that the nasal mask fits securely 

over your nose. It is normal to feel some air escaping through the small air vents on 
the elbow of the hose.

Please refer to the manufacturer’s instructions for additional information on topics, 
such as:
 

•  How to properly remove your mask

 

•  How to remove and change the mask cushion

 

•  How to adjust the length of the mask straps

Summary of Contents for 3B Medical Luna II





















Reviews:

No comments

Brands by name

Popular brands

Load more brands