manualshive.com logo in svg

Apria Healthcare 3B Medical Luna II, User Manual

Share
Download
Apria Healthcare 3B Medical Luna II User Manual Download Page 4

To set up the device:

1.

  Place the device on a firm, flat surface.. 

2.

   Install the filter cap into the device. 

3.

   Insert the plug of the power adapter into the DC inlet 

on the back of the device. Connect the power cord to 
the power adapter. Plug the other end of the power 
cord into the power outlet.

4.

   Connect one end of the tube to the air outlet of the 

device. Connect the other end of the tube to the mask 
according to the user manual for 
the mask.

5.

   Open the humidifier chamber cap 

and fill the water chamber with 
approximately 360 mL of water. 
Make sure the water does not 
exceed the maximum water  
level line.

WARNING!

 

•   Change the water before every 

use and do not surpass the  
MAX fill line.

CAUTION!

 

•   Empty the water chamber  

when the heated humidifier is 
not in use.

 

•   Distilled water is recommended.

 4 

|

Questions? Call 

877.265.2426

STEP 1: GET STARTED

GET STARTED

STEP 1

2

3

4

5

Power Adapter

Power Cord

1

DC Inlet

Air Outlet

Tube

Summary of Contents for 3B Medical Luna II





















Reviews:

No comments

Brands by name

Popular brands

Load more brands