User's Manual
6.
ACCESSING INTERNALS
6.1.
Opening the device
Required: Torx T10 screwdriver.
Power off the device and detach all cables to avoid short-circuit or damage.
Detach the device from the rack-mount kit.
Remove the four top screws and the top cover by pulling it upwards:
6.2.
Inside view
➊
Screws for AUX cover plate
➋
AUX card connector
➍
Pinout select jumpers for
lower DB25 connector (AES3 Port B)
➎
Pinout select jumpers for
upper DB25 connector (AES3 Port A)
6.3.
Installing AUX cards
Remove the screws holding the cover plate, and the blank cover plate
➊
Insert the AUX card from inside, using the supplied cover plate.
Make sure it is correctly fitted to the card connector
➋
Secure the card using two cover screws
➊
The card has been installed correctly if you are able to select an audio routing
mode involving AUX (long-press MODE button to enter Route Mode Selection).
12
