Rev. 2.0
1/23/06
Appro WH300 User’s Guide
27
5.
Connect the fan cable to the server board.
6.
Replace the access cover.
4.2
Replacing a Rear System Fan
1.
Remove the left side cover.
2.
Disconnect the fan power cable from the server board (see letter A in the following figure).
3.
Remove the system fan from its snap-in bracket by pressing the two bracket tabs outward
(see letter B in the figure).
4.
Install the new system fan in the snap-in bracket.
5.
Reconnect the fan cable to the server board.
6.
Install the left side cover.
