Appro VS-2112B Installation & Operation Manual Download

Page: 13 / 94

12. Power ON the Video Server and it will work normally if the entire update procedure goes

correctly.

13. Verify the version of the system software.

WARNING

1. Don’t use FAT32 or NTFS or other file formats in step 1.

2. Steps 1 to 3 have to be done on a PC.

3. Make sure the file of UPDATE.BIN is a correct one in step 3, or the VIDEO SERVER will

not work normally after being updated.

4. If the power of the VIDEO SERVER is suddenly lost in step 8, please remove the SD card

first and turn on the VIDEO SERVER next to test its operation. If the VIDEO SERVER

remains working normally, please go back to step 4; otherwise, please inform your

technical support.

5. In step 10, if the SD card is not removed and the Video Server does not get online as well,

the updating process must be repeated again after rebooting the Video Server.

6. Make sure that the SD card is inserted in a correct position in step 5, or the Video Server

will suffer permanent physical damage.

7. If the message "CSUM ERROR" appears in step 8, it implies a problem in the file of

UPDATE.BIN.

8. Don’t interrupt the process while the unit is updating itself; proceed with an SD card

not including any system software of the unit, or else the unit will crash.

Summary of Contents for VS-2112B































































































Search results

Summary of Contents for VS-2112B

Reviews:

Related manuals for VS-2112B

Brands by name

Popular brands

Appro VS-2112B, Installation & Operation Manual

Search results

Summary of Contents for VS-2112B

Reviews:

Related manuals for VS-2112B

Brands by name

Popular brands