Appro DVR-3704T, Installation & Operation Manual

Page: 26 / 47

5.5.3 MOTION SETTING
Here you can set the motion detection area of each channel.
MOTION SETTING ADVANCED SETTING
1. SENSITIVITY MOTION CHECKING
1.RECORD SETTING ENTER
CH1 1 HIGHEST 03 F
2.ALARM SETTING ENTER
CH2 1 HIGHEST 03 F
3.MOTION SETTING ENTER
CH3 1 HIGHEST 03 F
CH4 1 HIGHEST 03 F 4.NETWORK SETTING ENTER
2. DETECT AREA
5.SCHEDULE SETTING ENTER
CH1 ENTER
CH2 ENTER
CH3 ENTER
CH4 ENTER
1. SENSITIVITY:
Control the sensitivity of the motion detection function. Use the “^” and ”v” buttons to select the
sensitivity from “ 1 HIGHEST ”, “ 2 HIGH ”, “ 3 NORMAL ”, “ 4 LOW ” to “ 5 LOWEST ” for each
channel.
MOTION CHECKING
:
The alarm input in each channel can be set from 0 to 15 images. Once motion detection occurs
the numbers of images you set, the device will emit an alarm.
2. DETECT ZONE:
MOTION SETTING
1. SENSITIVITY MOTION CHECKING
CH1 1 HIGHEST 03 F
CH2 1 HIGHEST 03 F
CH3 1 HIGHEST 03 F
CH4 1 HIGHEST 03 F
2. DETECT AREA
CH1 ENTER
CH2 ENTER
CH3 ENTER
CH4 ENTER
KEY HINT
ENTER: ENABLE/DISABLE ONE
SAVE: ENABLE/DISABLE ALL
24