APPENDIX
KP-5562 / KP-5564 Touch POS Terminal
41
APPENDIX
Magnetic Stripe Reader (MSR) Installation
An optional MSR can be installed in both
right/left side of KP-5562/KP-5564.
By default, the MSR is installed on the right side.
Step 1 Remove the cover from the MSR
extension slot.
Step 2 Connect the MSR cable correctly.
Step 3 Fix the MSR module in position with 2
screws.
Integrated LCD/VFD Customer Display Installation
Step 1 Remove the top cover on the
main unit.
Step 2 Unfasten 2 thumb screws off
the rear cover by a coin.
Step 3 Fix the customer display onto
the main unit with 2 screws
and plug the wafer connector
to the COM4 port on the
mother board.
Step 4 Cover the screw holes with
plastic lids and reinstall the
rear cover.
NOTE:
Please refer to the SEC. 2.1.1 Magnetic Stripe Reader (MSR) Installation and SEC. 2.1.2
Integrated LCD/VFD Customer Display Installation for the complete instructions.
Summary of Contents for KP-5562
Page 2: ......
