APPENDIX
36
KP-5360 Fanless POS Terminal
APPENDIX
Magnetic Stripe Reader (MSR)
Installation
An optional MSR can be installed in both
right/left side of KP-5360
By default, the MSR is installed on the right
side.
Step 1 Remove the cover from the MSR
extension slot.
Step 2 Connect the MSR cable correctly.
Step 3 Fix the MSR module in position with 2
screws.
Integrated LCD/VFD Customer Display Installation
Step 1 Remove the top cover on the
main unit.
Step 2 Unfasten 2 thumb screws off
the rear cover by a coin.
Step 3 Fix the customer display set
onto the main unit with 2
screws and plug the wafer
connector to the COM6 port on
the I/O board.
Step 4 Cover the screw holes with
plastic lids and reinstall the
rear cover.
NOTE:
Please refer to the SEC. 2.1.1 Magnetic Stripe Reader (MSR) Installation and SEC. 2.1.2
Integrated LCD/VFD Customer Display Installation for the complete instructions.
All manuals and user guides at all-guides.com
